-
ATD 125
vertical direct drive table
Technical information
Faceplate diameter min.
mm
125
Axis of rotation
./.
verti.
Load capacity
kg
80
Max. revolutions per minute
Rpm
2.000
Bearing diameter
mm
115 x 78
Max. center bore diameter
mm
35
Unit weight
kg
40
Max. tilting moment at the axis of rotation
Nm
800
Max. axial load
N
5.000
Max. mass moment of inertia
kgm²
0,8
Max. tangential torque with clamping actuated
Nm
240
Max. tangential torque without clamping
Nm
40
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
205
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 160
vertical direct drive table
Technical information
Faceplate diameter min.
mm
160
Axis of rotation
./.
verti.
Load capacity
kg
200
Max. revolutions per minute
Rpm
4.000
Bearing diameter
mm
180 x 100
Max. center bore diameter
mm
50
Unit weight
kg
75
Max. tilting moment at the axis of rotation
Nm
2.000
Max. axial load
N
6.000
Max. mass moment of inertia
kgm²
6
Max. tangential torque with clamping actuated
Nm
800
Max. tangential torque without clamping
Nm
240
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
230
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 200
vertical direct drive table
Technical information
Faceplate diameter min.
mm
200
Axis of rotation
./.
verti.
Load capacity
kg
350
Max. revolutions per minute
Rpm
3.000
Bearing diameter
mm
210 x 120
Max. center bore diameter
mm
70
Unit weight
kg
80
Max. tilting moment at the axis of rotation
Nm
3.200
Max. axial load
N
25.000
Max. mass moment of inertia
kgm²
15
Max. tangential torque with clamping actuated
Nm
1.200
Max. tangential torque without clamping
Nm
360
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
230
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 280
vertical direct drive table
Technical information
Faceplate diameter min.
mm
280
Axis of rotation
./.
verti.
Load capacity
kg
500
Max. revolutions per minute
Rpm
2.000
Bearing diameter
mm
240 x 150
Max. center bore diameter
mm
100
Unit weight
kg
120
Max. tilting moment at the axis of rotation
Nm
5.000
Max. axial load
N
30.000
Max. mass moment of inertia
kgm²
37
Max. tangential torque with clamping actuated
Nm
2.400
Max. tangential torque without clamping
Nm
440
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
230
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 400
vertical direct drive table
Technical information
Faceplate diameter min.
mm
400
Axis of rotation
./.
verti.
Load capacity
kg
800
Max. revolutions per minute
Rpm
1.200
Bearing diameter
mm
385 x 260
Max. center bore diameter
mm
150
Unit weight
kg
460
Max. tilting moment at the axis of rotation
Nm
12.000
Max. axial load
N
40.000
Max. mass moment of inertia
kgm²
330
Max. tangential torque with clamping actuated
Nm
4.600
Max. tangential torque without clamping
Nm
1.300
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
320
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 520
vertical direct drive table
Technical information
Faceplate diameter min.
mm
520
Axis of rotation
./.
verti.
Load capacity
kg
1.600
Max. revolutions per minute
Rpm
800
Bearing diameter
mm
450 x 325
Max. center bore diameter
mm
200
Unit weight
kg
920
Max. tilting moment at the axis of rotation
Nm
16.000
Max. axial load
N
60.000
Max. mass moment of inertia
kgm²
750
Max. tangential torque with clamping actuated
Nm
5.000
Max. tangential torque without clamping
Nm
1.500
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
375
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 630
vertical direct drive table
Technical information
Faceplate diameter min.
mm
630
Axis of rotation
./.
verti.
Load capacity
kg
2.800
Max. revolutions per minute
Rpm
700
Bearing diameter
mm
525 x 395
Max. center bore diameter
mm
290
Unit weight
kg
950
Max. tilting moment at the axis of rotation
Nm
23.000
Max. axial load
N
80.000
Max. mass moment of inertia
kgm²
1.100
Max. tangential torque with clamping actuated
Nm
7.600
Max. tangential torque without clamping
Nm
2.200
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
410
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 800
vertical direct drive table
Technical information
Faceplate diameter min.
mm
800
Axis of rotation
./.
verti.
Load capacity
kg
5.000
Max. revolutions per minute
Rpm
600
Bearing diameter
mm
600 x 460
Max. center bore diameter
mm
340
Unit weight
kg
1.100
Max. tilting moment at the axis of rotation
Nm
32.000
Max. axial load
N
120.000
Max. mass moment of inertia
kgm²
1.700
Max. tangential torque with clamping actuated
Nm
16.000
Max. tangential torque without clamping
Nm
5.300
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,01
Table height
mm
480
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 1000
vertical direct drive table
Technical information
Faceplate diameter min.
mm
1.000
Axis of rotation
./.
verti.
Load capacity
kg
8.000
Max. revolutions per minute
Rpm
300
Bearing diameter
mm
870 x 650
Max. center bore diameter
mm
450
Unit weight
kg
1.500
Max. tilting moment at the axis of rotation
Nm
60.000
Max. axial load
N
180.000
Max. mass moment of inertia
kgm²
6.000
Max. tangential torque with clamping actuated
Nm
27.500
Max. tangential torque without clamping
Nm
7.500
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,02
Table height
mm
500
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
-
ATD 1250
vertical direct drive table
Technical information
Faceplate diameter min.
mm
1.250
Axis of rotation
./.
verti.
Load capacity
kg
12.000
Max. revolutions per minute
Rpm
250
Bearing diameter
mm
1.095 x 850
Max. center bore diameter
mm
600
Unit weight
kg
2.400
Max. tilting moment at the axis of rotation
Nm
90.000
Max. axial load
N
250.000
Max. mass moment of inertia
kgm²
10.100
Max. tangential torque with clamping actuated
Nm
40.000
Max. tangential torque without clamping
Nm
13.300
Clamping type
./.
hydrau.
Max. clamping pressure
bar ü
63
Dividing accuracy with direct mounted encoder
''
+/- 3
Repeatability
''
+/- 1
Concentricity of the pilot diameter
mm
0,01
Rectangularity including wobble
mm
0,03
Table height
mm
650
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface - Partial extractions from the data sheets may lead to an incorrect equipment selection and specification. Rev.4.2 / 15.12.2011
Choose your language
